Wafer-wound roller brush

Disc-packed rollers for continuous descaling, conveyor cleaning and surface finishing. Wafers are individually replaceable, so a worn face does not scrap the shaft.

Made to order TIR ≤ 0.15 mm Field-replaceable wafers MOQ 20 pc

Core specification
Outside diameter	80 – 400 mm (Ø 300 mm typical)
Face width	50 – 2,000 mm, keyway or plain bore
Trim length	20 – 80 mm
Filament	0.20 – 0.50 mm crimped steel, SS 304/316, abrasive nylon
Core	Steel tube, 25–60 mm bore, or aluminium on request
Max speed	2,500 rpm (balanced to G6.3 at 3,000 rpm on request)
Operating temp.	−20 to +90 °C (PEEK filament to 250 °C)
Lead time	15 – 25 working days after sample approval

Request a quote for this item

Tell us your diameter, face width and line speed. A technical quotation follows within 48 hours.

Construction

Filament wound into individual steel-backed wafers, then pressed onto the shaft
Wafer packs separated by spacers to control density and heat build-up
End flanges clamped, not welded — allows field replacement of a single pack
Crimped fill for flexible contact; knotted fill for aggressive scale removal

Typical use

Strip line descaling ahead of pickling or galvanising
Conveyor belt cleaning in foundries and bulk handling
Pre-treatment of sheet before adhesive bonding or powder coating
Wood-based panel sanding and sealer roller lines

Other configurations

All families

Sweeper

Sweeper head brush

Replacement heads for walk-behind and ride-on sweepers. PP or mixed bristle for outdoor use.

View specs MOQ 50 pc

Cup

Cup brush, M14 arbor

Deep cup for fillet welds and recessed surfaces. Crimped or knotted fill, 65–100 mm diameter.

View specs MOQ 100 pc

Abrasive

Abrasive nylon disc

SiC-filled filament for deburring aluminium and stainless without altering part geometry.

View specs MOQ 50 pc

Tell us the part. We will tell you the brush.

Send a drawing or a photo — you will have a technical quotation within two working days.

Request a quote Email engineering