Sweeper
Sweeper head brush
Replacement heads for walk-behind and ride-on sweepers. PP or mixed bristle for outdoor use.
View specs
MOQ 50 pc
FIG. A — Flat disc brush. Drawing available as PDF or STEP on request.
Disc & cup brushes
Flat disc brush
Radial tufts on a flat steel plate. The workhorse for robotic deburring cells where the spindle holds a fixed offset.
| Diameter | 50 – 300 mm |
|---|---|
| Arbor | 22.2 mm, M14, or custom spline |
| Filament | Crimped steel, SS 304/316, abrasive nylon, brassed steel |
| Filament Ø | 0.30 – 0.60 mm |
| Plate | Steel, zinc-plated or stainless |
| Max speed | 6,000 rpm (Ø ≤ 150 mm) |
| Lead time | 12 – 20 working days |
Request a quote for this item
Tell us your diameter, face width and line speed. A technical quotation follows within 48 hours.
Construction
- Tufts anchored through a punched and rolled steel plate
- Trim length and tuft angle set to the robot approach vector
- Dynamic balance checked per batch
Typical use
- Robotic weld dressing and edge blending
- Paint and oxide removal on flat stock
- Concrete and stone surface texturing
Related
All families
Other configurations
Roller
Tufted conveyor roller
Stapled tufts in a machined tube. Softer contact for delicate webs and sheet handling.
View specs
MOQ 20 pc
Roller
Spiral-wound roller brush
Continuous filament wound into a steel channel helix. Even wear across the full face width.
View specs
MOQ 20 pc
Tell us the part. We will tell you the brush.
Send a drawing or a photo — you will have a technical quotation within two working days.