Roller
Tufted conveyor roller
Stapled tufts in a machined tube. Softer contact for delicate webs and sheet handling.
View specs
MOQ 20 pc
FIG. A — Spiral-wound roller brush. Drawing available as PDF or STEP on request.
Roller brushes
Spiral-wound roller brush
A single continuous strip spiralled into a channel core. No tuft lines, no wavy wear pattern, and the cheapest way to cover a wide face.
| Outside diameter | 50 – 250 mm |
|---|---|
| Face width | 100 – 2,000 mm |
| Filament | Nylon 6.12, PP, abrasive nylon, natural bristle |
| Filament Ø | 0.30 – 1.20 mm |
| Core | Galvanised or stainless channel, spiralled |
| Max speed | 1,800 rpm |
| Lead time | 15 – 25 working days |
Request a quote for this item
Tell us your diameter, face width and line speed. A technical quotation follows within 48 hours.
Construction
- Channel strip formed into a helix around the shaft, then crimped in place
- Fill density set by strip pitch — tighten the pitch for stiffer contact
- End caps welded or pressed depending on shaft interface
Typical use
- Conveyor cleaning on food and packaging lines
- Dusting rollers for corrugated board
- Wet washing of glass and panel edges
Related
All families
Other configurations
Conical
Conical knot brush
Hole edges, internal corners and T-joint cleaning. 6 mm shank for die grinders.
View specs
MOQ 200 pc
Wheel
Knotted wire wheel
Aggressive weld cleaning and heavy scale removal. Knot density tuned to your spindle speed.
View specs
MOQ 100 pc
Tell us the part. We will tell you the brush.
Send a drawing or a photo — you will have a technical quotation within two working days.