Roller
Spiral-wound roller brush
Continuous filament wound into a steel channel helix. Even wear across the full face width.
View specs
MOQ 20 pc
FIG. A — Conical knot brush. Drawing available as PDF or STEP on request.
Conical & end brushes
Conical knot brush
A tapered knot reaches into corners, hole edges and T-joints that a wheel physically cannot enter.
| Diameter | 20 – 100 mm at the base |
|---|---|
| Shank | 6 mm (3 mm and 8 mm on request) |
| Fill | Knotted or crimped |
| Wire | Steel, stainless, brassed |
| Max speed | 20,000 rpm |
| Length | 25 – 70 mm |
| Lead time | 12 – 20 working days |
Request a quote for this item
Tell us your diameter, face width and line speed. A technical quotation follows within 48 hours.
Construction
- Knot anchored on a tapered mandrel, then crimped to the shank
- Shank ground concentric to the knot axis
- Tip trimmed square for spot work
Typical use
- Hole edge deburring after drilling
- Internal corner cleaning on welded frames
- Brake caliper and engine port cleanup
Related
All families
Other configurations
Strip
Channel strip brush
Galvanised or stainless U-channel, straight or bent to profile. Supplied by the metre or cut to length.
View specs
MOQ 50 m
Roller
Wafer-wound roller brush
Disc-packed construction for high-pressure descaling. Individual wafers can be replaced on site.
View specs
MOQ 20 pc
Tell us the part. We will tell you the brush.
Send a drawing or a photo — you will have a technical quotation within two working days.