Conical
Conical knot brush
Hole edges, internal corners and T-joint cleaning. 6 mm shank for die grinders.
View specs
MOQ 200 pc
FIG. A — Wafer-wound roller brush. Drawing available as PDF or STEP on request.
Roller brushes
Wafer-wound roller brush
Disc-packed rollers for continuous descaling, conveyor cleaning and surface finishing. Wafers are individually replaceable, so a worn face does not scrap the shaft.
| Outside diameter | 80 – 400 mm (Ø 300 mm typical) |
|---|---|
| Face width | 50 – 2,000 mm, keyway or plain bore |
| Trim length | 20 – 80 mm |
| Filament | 0.20 – 0.50 mm crimped steel, SS 304/316, abrasive nylon |
| Core | Steel tube, 25–60 mm bore, or aluminium on request |
| Max speed | 2,500 rpm (balanced to G6.3 at 3,000 rpm on request) |
| Operating temp. | −20 to +90 °C (PEEK filament to 250 °C) |
| Lead time | 15 – 25 working days after sample approval |
Request a quote for this item
Tell us your diameter, face width and line speed. A technical quotation follows within 48 hours.
Construction
- Filament wound into individual steel-backed wafers, then pressed onto the shaft
- Wafer packs separated by spacers to control density and heat build-up
- End flanges clamped, not welded — allows field replacement of a single pack
- Crimped fill for flexible contact; knotted fill for aggressive scale removal
Typical use
- Strip line descaling ahead of pickling or galvanising
- Conveyor belt cleaning in foundries and bulk handling
- Pre-treatment of sheet before adhesive bonding or powder coating
- Wood-based panel sanding and sealer roller lines
Related
All families
Other configurations
Wheel
Crimped wire wheel
General rust and paint removal. Flexible face that follows contours without digging in.
View specs
MOQ 100 pc
Roller
Tufted conveyor roller
Stapled tufts in a machined tube. Softer contact for delicate webs and sheet handling.
View specs
MOQ 20 pc
Tell us the part. We will tell you the brush.
Send a drawing or a photo — you will have a technical quotation within two working days.